Case Studies
Why Pharmaceutical Orbital Welding Standards Ar...
Pharma orbital welding demands Ra≤0.8μm surfaces and borescope inspection—stricter bioburden control than petrochemical piping standards.
Why Pharmaceutical Orbital Welding Standards Ar...
Pharma orbital welding demands Ra≤0.8μm surfaces and borescope inspection—stricter bioburden control than petrochemical piping standards.
The Global Welder Shortage: What the Data Means...
Global welder shortages, confirmed by IIW/AWS data, are pushing fabrication and pipeline shops toward automated and orbital welding for consistent, repeata
The Global Welder Shortage: What the Data Means...
Global welder shortages, confirmed by IIW/AWS data, are pushing fabrication and pipeline shops toward automated and orbital welding for consistent, repeata
Cutting Machine Model Selection From CM3 to CM1...
A published equipment-selection discussion for Spanish tube work considered CM3 through CM12 before a cutting model had been finalized. The useful lesson is to resolve OD, wall, material and the...
Cutting Machine Model Selection From CM3 to CM1...
A published equipment-selection discussion for Spanish tube work considered CM3 through CM12 before a cutting model had been finalized. The useful lesson is to resolve OD, wall, material and the...
AWS D10.12 vs ASME IX for Orbital Welding: Choo...
Clarifies when orbital welding programs need AWS D10.12, ASME IX, or both—mapped by petrochemical, pharma, and LNG applications.
AWS D10.12 vs ASME IX for Orbital Welding: Choo...
Clarifies when orbital welding programs need AWS D10.12, ASME IX, or both—mapped by petrochemical, pharma, and LNG applications.
C120 and FXT20 Planning for DN16-DN100 Closed-H...
A published planning discussion for a buyer in Turkey considered C120 with FXT20 for a range described as DN16–DN100. That nominal range is not a complete head-selection specification.
C120 and FXT20 Planning for DN16-DN100 Closed-H...
A published planning discussion for a buyer in Turkey considered C120 with FXT20 for a range described as DN16–DN100. That nominal range is not a complete head-selection specification.
FXT20 Pilot Review for SUS316 Sensor Tube Welding
A South Korea buyer evaluated C5 with FXT20 for SUS316 temperature sensor tubes from 3.2 mm to 12.7 mm and wall thickness at or below 1 mm.
FXT20 Pilot Review for SUS316 Sensor Tube Welding
A South Korea buyer evaluated C5 with FXT20 for SUS316 temperature sensor tubes from 3.2 mm to 12.7 mm and wall thickness at or below 1 mm.